Make a RAID Volume Bootable Using the LSI WebBIOS Configuration Utility

Make a RAID Volume Bootable Using the LSI WebBIOS Configuration Utility

1. Reset or power on the server.
For example, to reset the server:
■ From the local server, press the Power button (approximately 1 second) on the
front panel of the server to power off the server, then press the Power button
again to power on the server.
■ From the Oracle ILOM web interface, select Host Management > Power
Control, then select Reset from the Select Action list box.
■ From the Oracle ILOM CLI, type: reset /System
The power-on self-test (POST) sequence begins.

2. While the BIOS is running the power-on self-tests (POST), and upon seeing the
prompt Press <Ctrl><H> for WebBIOS..., immediately press the Ctrl+H
key combination to access the LSI MegaRAID utility.
The Adapter Selection screen appears.